Get Good Gear: Feature Ford Ranger Ute Setup

[vc_row][vc_column width=”1/1″][x_video_embed type=”16:9″]

[/x_video_embed][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][text_output][pullquote cite=”Jamie’s Touring Solutions” type=”left, right”]Source: http://www.jtsonline.com.au 1300 377 128 contact@jtsonline.com.au[/pullquote]

Shane from Jamie’s Touring Solutions is very proud of his 2015 Ford Ranger 4WD Setup, so much so he decided to due this youtube clip showing some of his customisations.

To give the Ford Ranger some clearance and to handle better off road, Shane comes a 2″ lift kit from Tough Dog Suspension plus a set of oversized tyre from the team at BF Goodrich.

To get the best performance on and off road Shane went to the BFGoodrich T/A All terrain tyre.

At the back Shane went for an ARB dual cab canopy with a JTS Rear drawer system and his custom 12 volt installation.

The 12 Volt system includes:

    • Redarc BCDC 1240 DC to DC Charger
    • Fullriver 120 amp hour deep cycle battery
    • Cotek 350 watt pure sine wave inverter
    • JTS 12 Volt Fuse box relays systems
    • Custom 12 volt switching and LED light strips
    • MSA DS40 drop down fridge slide
    • Nation Lunar 12 volt fridge

Some of the mods still to come include:

  • Custom Rhino 4×4 front bull bar
  • 20″ Sniper LED Light Bar
  • Rhino roof rack system

 

If you want to know how to set up your dual cab 4wd then either visit the JTS website http://www.jtsonline.com.au call the team on 1300 377 128 or email us contact@jtsonline.com.au

Don’t forget to tell em Get Good Gear sent ya …[/text_output][/vc_column][/vc_row]

2 Comments

  1. The PX ranger depicted in the video had Pos 18 rims fitted, which to the best of my knowledge are not allowed in QLD?

    • We recommend you check with your local transport authority in regards to legality for each state.
      Your local tyre distributor can also be a valuable resource.

Leave a Reply

Your email address will not be published. Required fields are marked *